Description
Audio-Technica AT-LPW50BT-RW Wireless Belt-Drive Turntable
The AT-LPW50BT-RW extends Audio-Technica’s line of fully manual, belt-drive wood turntables by adding the option of wireless connectivity. Now you can enjoy optimal high-fidelity audio reproduction from vinyl with your choice of wired or wireless operation.
The AT-LPW50BT-RW features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a stunning rosewood-finished wood veneer, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.
The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and a matching matte-silver AT-HS4 universal ½”-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.
The AT-LPW50BT-RW is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct wired connection to components with or without a dedicated phono input. The turntable also connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology.
Features
- Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
- High-fidelity audio with Bluetooth wireless technology
- Motor features a speed-sensor system to maintain accurate platter rotation speed
- Adjustable dynamic anti-skate control
- Professional anti-resonance, die-cast aluminum platter with rubber mat
- AT-HS4(silver) universal ½“-mount headshell and AT-VM95E (black) Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus
- The AT-VM95Ecartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
- Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest
- Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with rosewood-finished wood veneer
- Built-in switchable phono pre-amplifier for phono or line-level output
- AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
- Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover
Specifications
Communication Specifications
|
Communication system |
Bluetooth version 5.2 |
|
RF Output |
15 mW EIRP |
|
Maximum Communication Range |
Line of sight – approx. 10 m (33′) |
|
Frequency Band |
2.402 GHz to 2.480 GHz |
|
Modulation Method |
GFSK, Pi/4DQPSK, 8DPSK |
|
Supported Bluetooth Profiles |
A2DP |
|
Supported Codec |
SBC |
Turntable Specifications
|
Type |
Belt-drive manual turntable |
|
Motor |
DC servo with Active Speed Stabilization |
|
Drive Method |
Belt drive |
|
Speeds |
33-1/3 RPM, 45 RPM |
|
Turntable Platter |
Aluminum Die Casting |
|
Wow and Flutter |
< 0.15 % WRMS (33 RPM) at 3 kHz |
|
Signal-to-Noise Ratio |
> 60 dB |
|
Output Level |
PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec LINE: 200 mV nominal at 1 kHz, 5 cm/sec |
|
Phono Pre-Amp Gain |
35 dB nominal, RIAA equalized |
Tonearm Specifications
|
Type |
Static balanced straight carbon tonearm |
|
Effective Length |
223.6 mm |
|
Overhang |
18.6 mm |
|
Maximum Tracking Error Angle |
Less than 2.0° |
|
Stylus Pressure Adjustment Range |
0 to 3.0 g |
|
Applicable Cartridge Weight Range (including headshell) |
11.5 to 16.5 g |
Cartridge and Headshell Specifications
|
Cartridge Model |
AT-VM95EBK |
|
Cartridge Type |
VM |
|
Recommended Load Impedance |
47,000 ohms |
|
Output Voltage |
4.0 mV (mV at 1 kHz, 5 cm/sec) |
|
Stylus |
0.3 × 0.7 mil bonded elliptical stylus |
|
Cantilever |
Aluminum pipe |
|
Tracking Force Range |
1.8 to 2.2 g (standard 2.0 g) |
|
Cartridge Weight |
6.1 g (0.22 oz) |
|
Headshell Model |
AT-HS4 SV |
|
Headshell Weight |
8.5 g (including lead wires) 7.7 g (excluding lead wires) |
|
Headshell Overhang Adjustment |
±5 mm |
General Specifications
|
Power Supply Requirements |
100-240 V, 50Hz/60Hz, 0.6A Max. |
|
Power Consumption |
1.8 W |
|
AC Adapter |
12 V, 1.0 A |
|
Dimensions |
420 mm (16.54″) × 340 mm (13.39″) × 126 mm (4.96″) (W × D × H) |
|
Weight |
5.5 kg (12lbs) |
|
Accessories Included |
・Dust cover ・Rubber mat ・Platter (with drive belt) ・Dust cover hinges ・Counterweight ・Headshell (AT-HS4 SV) with VM stereo cartridge (AT-VM95EBK) ・45-RPM adapter ・RCA audio cable (Approx. 1.0 m (3.3′)) ・AC adapter (Approx. 1.5 m (4.9′)) |
|
Replacement Stylus (sold separately) |
AT-VMN95EBK |
|
Replacement Headshell (sold separately |
AT-HS4SV |
|
Replacement Belt (sold separately) |
AT-LPW50BT exclusive belt |
For product improvement, the product is subject to modification without notice.
